"The horizontal rods were welded on. Where a rod terminated on the hull it was lapped for six inches (152.4 mm) with another rod and spotwelded. All the rod joints were treated in this same way. The rods were stapled at approximately three-inch (76 mm) centers. Every second intersection of horizontal with vertical rods was spot welded. As there were two layers of mesh between the vertical and horizontal rods, the mesh was faired smooth in this small area. Care was taken not to burn too large a hole in the plastic sheeting where the rod welding took place."
Quote Details
Added by wikiquote-import-bot
Unverified quote
0 likes
Original Language: English
Available Languages (1)
Sources
TASK 13 — Horizontal Reinforcing Bars, p. 22.
https://en.wikiquote.org/wiki/Ferrocement
Revision History
No revisions have been submitted for this quote.
Categories
Ferrocement
62 quotes on TrueQuotesView all quotes by Ferrocement →
Related Quotes
"The purpose of this book is to match an existing resource with an existing need. The need is shelter... simpler struc…"
"All ferrocement can be said to be , but all types of reinforced concrete are not ferrocement."
"[T]o increase the load capacity of the domes and to avoid excessive deformations, it is necessary to provide the best…"
"Chicken wire mesh was recommended because of its ductility. It shows no oxidation problems as it is made with galvani…"
"This highly specialized, but by no means highly complicated building technique had been almost forgotten after its fi…"
"Ferrocement is used relatively little in the housing field because it is regarded as a labor-intensive... building te…"
"The domes were very easily repaired by replacing the damaged mortar or mesh..."
"[T]he ferrocement roofings are practically waterproof and that they do not need any special treatment."
"[A] dome of any shape will amply comply with safety requirements. Because of this it is believed that it is possible …"
"[F]erroconcrete would be a more accurate term for our material, but that term is already in common use to describe...…"